(The picture shows the equipment used by foreign customers for many years)

After the oil press is installed and debugged on the customer's site, the customer not only uses the oil Press correctly, in order to ensure the normal use of the oil press, it is also necessary to regularly maintain the oil press.

For more information about equipment maintenance, see:

1. Clean the machine pit and keep it dry and clean.

2. Check the position and horizontal condition of the machine. The displacement shall not exceed 5mm and the horizontal shall not exceed 2mm.If it exceeds, it will be classified.

3. Cleaning Machine table oil stains, especially the motor and hydraulic valve on the hydraulic station.And then boot 18MPA packing 5 fen zhong observation did oil spill, don't pressure relief.If the hydraulic valve does not leak oil and works well, it is generally not necessary to fasten the screws.

4. Check whether the hydraulic station, heat transfer oil, etc. are insufficient, whether the quality is modified, and consider replacing or filtering.

5. Check whether the eight big nuts of the column are loose. If they are loose, they must be tightened again.

6. Focus on cleaning the dirt on the surface of the hot plate, keep it bright and clean, and put anti-rust oil on the condition. It is better to remove the mould and clean it alone.Clean the hot plate channel and hose.

7. Fasten the up and down screws and the Middle screws of the trapezoidal plate, and fasten the screws between the hot plate and the bar plate.

8. The interior of the electric cabinet and all circuits shall be kept free of water stains and dust.All internal and external power supplies of the electric cabinet are powered off.Check where the joint is aging and improve it in time.

9. If conditions permit, paint the whole machine again and cover it with canvas.

10. Solenoid valves and meters with unstable working status or long-time use can be replaced if conditions permit.

11. Other matters shall be handled according to the on-site situation of your company.