Industry news_News Center_Wuxi Jinhe Science& Technology Co,.ltd

EVA Rubber & plastic Foaming press Vulcanizing press Composite press





锦和科技

简体中文

English





NEWS

Position：

Homepage

News Center

Industry news

Selection of hydraulic oil viscosity

Select the appropriate viscosity hydraulic oil. The system with high temperature and high pressure should use hydraulic oil with higher viscosity, so that better lubricity can be obtained. On the contrary, the system with low temperature and low pressure should use hydraulic oil with lower viscosity, which can reduce energy consumption.

10 2021/11

Vulcanized shoe mixing process

Plasticizing is a processing process that changes rubber from an elastic state to a certain plastic state. Properly masticated rubber, the compounding agent is easily mixed into the rubber compound during mixing

10 2021/11

Did you know that oil contamination can damage hydraulic components so much?

Various pollutants in the oil cause various forms of wear of components, and solid particles enter the gap of the moving pair, causing cutting wear or fatigue wear on the surface of the parts. Erosive wear is caused by the impact of the solid particles in the high-velocity liquid flow on the surface of the element. The water in the oil and the products of oxidative deterioration of the oil have a corrosive effect on the components. In addition, air in the oil in the system causes cavitation, causing erosion and damage to component surfaces.

10 2021/11